Plumbed Salon Pedicure Chair
The Plumbed Salon Pedicure Chair is our multi-station model for salons buying pedicure chairs for sale in rows. Each has a cream leather-look recliner on an oak-veneer raised base with a round white porcelain foot bowl and brushed brass faucet, built for 110–120V/60Hz. It is made in our Foshan factory for US salons.
- Typical MOQ
- Mixed orders from 5 pieces; single units on request
- Production lead time
- 30–40 days after approval
- Build
- Steel frame, oak-veneer moisture-resistant base panels, glazed porcelain bowl
- Electrical
- Built for 110–120V/60Hz; listing status (UL/ETL) is confirmed per model in the quotation; plumbing by a licensed plumber, dedicated 15A GFCI circuit by a licensed electrician
- Customisation
- Upholstery color, base veneer, bowl color and faucet finish on volume orders
Pricing is quoted per order: tell us the quantity, colours and delivery ZIP code and we reply within one business day.
Overview
The Plumbed Salon Pedicure Chair is designed to be installed in matching rows, with a clean, warm look of cream upholstery, oak veneer and brushed brass. Each chair has a round white porcelain foot bowl set into a raised base, permanently plumbed to hot and cold supply and drain. As a factory-direct manufacturer, we build each row in our Foshan factory so every chair matches.
Build and porcelain bowl
The raised base is a steel frame with moisture-resistant panels and oak veneer, sealed against splashes. The porcelain bowl is glazed, scratch resistant and simple to disinfect, and it has no whirlpool pipes. The brushed brass faucet connects to 1/2 inch hot and cold lines, and the drain runs to a 1 to 1.5 inch line with a P-trap. A licensed plumber should complete installation with any backflow device local code requires.
Comfort and workflow
The recliner seat uses high-density foam, and the back reclines for relaxation. A technician stool sits in front of each bowl at a comfortable working height. When comparing pedicure chairs for sale, look at bowl height, footrest adjustment and the space for the technician’s knees; this model is laid out to keep the technician upright.
Electrical, sanitation and layout
The recliner is built for 110–120V/60Hz on a dedicated 15A GFCI circuit; listing status (UL/ETL) is confirmed per model in the quotation. California Board of Barbering and Cosmetology rule 16 CCR 980.2 and Texas 16 TAC 83.108 both set cleaning, disinfection and logging steps for pedicure equipment, so check your state board rules and keep a cleaning log beside each chair. If you are comparing pedicure chairs for sale for a multi-station row, plan about 5.5 to 6 feet of width per chair, plus 3 feet in front for the technician.
| Feature | Plumbed salon chair | Typical budget pedicure chair |
|---|---|---|
| Bowl | Glazed porcelain, no pipes | Acrylic or resin whirlpool |
| Base | Oak veneer, raised | Plastic or laminate |
| Faucet | Brushed brass | Chrome plastic |
| Row matching | Built in one batch | Varies by stock |
| Best for | Multi-station rows | Single replacements |
Specifications
| Overall dimensions | Approx. 56" L × 30" W × 54" H |
|---|---|
| Weight (typical) | Approx. 250 lb |
| Bowl | Round glazed white porcelain, approx. 4 gal |
| Faucet | Brushed brass-tone single-handle |
| Base | Raised platform, oak veneer |
| Seat | Reclining, high-density foam |
| Power | 110–120V/60Hz, dedicated 15A GFCI circuit |
| Plumbing | 1/2" hot and cold supply, 1–1.5" drain with P-trap |
| Upholstery | PU leather-look, cream |
| Rated load (typical) | Approx. 330 lb |
Dimensions and ratings are typical for this model; the confirmed specification sheet is sent with your quotation.
Customisation options
Upholstery is available in cream, white, taupe, gray or a matched color. The base can be oak, walnut, white or black veneer, the bowl white or black, and the faucet brushed brass tone, chrome or matte black. Logo plates are possible on volume orders.
Where it works best
Ideal for nail salons, spas and franchise groups fitting out three or more pedicure stations at once. It also suits new-build salons where plumbing can be run to each station.
Ordering, samples and delivery
- Mixed orders welcome: combine chairs, stations and spa units in one shipment.
- Upholstery swatches and a pre-production sample can be arranged; sample cost and freight are quoted with your order.
- Delivered by LTL freight to your salon or warehouse anywhere in the United States, with liftgate on request.
- Every quotation lists the warranty for frame, hydraulic pump or motors, and upholstery for that model.
Questions buyers ask
What should I compare when looking at pedicure chairs for sale?
Compare the bowl material, how the basin is cleaned, the electrical listing status, the base material, footrest and technician comfort, and lead time. Ask each supplier for dimensions and utility requirements so your contractor can plan plumbing before the chairs arrive.
How many chairs fit in my space?
Allow about 5.5 to 6 feet of width per chair and around 9 feet of depth including the technician area. A 20-foot wall typically fits three chairs with room for a small trolley at each end. Send us your floor plan with plumbing positions, and we can suggest a layout with the quotation.
Can I order a full row with matching finishes?
Yes. Rows are produced in one batch in our Foshan factory, so upholstery, veneer and faucet finishes match across every chair, and later reorders are built to the same recorded specification so additions sit well with the row. Mixed-model orders start from 5 pieces, and technician stools and manicure tables can be included in the same shipment.
How are pedicure chairs delivered?
Each chair is crated and palletized, then shipped by container to a US port and delivered by LTL freight to your door. Liftgate delivery is available on request. Inspect every crate on arrival and note visible damage before signing the delivery receipt.
